Waste water recovery and treatment are now crucial to any pressure washer. The EPA is cracking down, with bigger fines and stricter rules and regulations you can’t afford not to be recovering and treating your waste water. As complicated as the rules and regulations are, the equipment is straight foward and easy to use. We provide the best in waste water recovery and treatment so you won’t have to worry about EPA fines.
Oil Water Separator
This highly efficient filtration system drastically reduces the amount of wash water you need on the job. As wash water is recovered into your reclaim system the filtration module separates solids and oils allowing you to recycle and reuse your wash water on site and\or discharge to a septic sewer.
Click to see it mounted on a trailer
Features
- “Wicking Action” separation is efficient
- Removes Oil & semi dissolved solids
- Remove up to 1 1⁄2 gal. of oil per hour
- Affordable, Compact, Portable, Lightweight
- Reuse wash water on site!
- Lid with seal & fasteners allows for easy access to the inside of the unit.
Hydrotek Flatwork Filtration System – AZF05
The AZF05 is utilized where dirty flatwork washing is required and degreasers are not utilized. The AZF05 allows you to wash, contain, recycle and reuse wash water. For added convenience the filtration system can be factory mounted on a Hydro Tek trailer with a SC series pressure washer (up to 6 gpm) so an outside power supply is not required. This system has an 8 stage filtration process and filters to 5 microns. The treated wastewater is transferred back to your supply tank for reuse and water conservation. Practical and affordable, the AZF05 is the turn-key choice for professional cleaning of floors, concrete and buildings while protecting the environment by capturing wastewater and filtering it.
Click to see it mounted on a trailer
- Designed For Truck or Trailer Installation
- 8 Stage Filtration Process
- Hydrocarbon Absorption
- Carbon Filter
- Capture and Pump Waste Water
- Replaceable Filter Cartridges
- Intelligent sump system traps waste solids and drains down to 1/4” eliminating standing wastewater.
- 12vdc / 115vac Power Supply
- No external power required when used with a SC Series Pressure Washer
- Includes: (2)Water Burms, (2)Sand Burms, (2)Absorption Burms
- Sump Recovery Pump with 25’ Hose
Vacuum-Berm Systems
Reclaiming wash water from job sites isn’t a hassle…It’s an opportunity. The fact is; strict environmental laws are on the mind of most corporate managers these days.
Indeed, contractors offering environmentally compliant services get far more work than those that don’t. They also get paid more!
PEV Series
Introducing the PEV series vacuum/reclaim systems; the only affordable multi-function industrial vacuum on the market.
For the serious, profit hungry cleaning contractor, the PEV is exactly what you need to outfox competitors and attract high paying new customers.
Click to see it mounted on a trailer
Features:
- Vacuum Motor : Dual 3-Stage
- Recovery Tank : 30 gallons
- Lift : 210”
- CFM : 200
- AMPS : 25.0
- Hose : 25’ ft*
- Tank Finish : powdercoat
- Auto Pump Out : optional
SGV Series
Introducing the SGV series vacuum/reclaim systems; the only affordable multi-function industrial vacuum on the market. Available with a 6.5hp – 25hp gas engines, these are the most powerful gas powered vacuum systems available.
Features:
Motor HP : 6.5 to 25 HP
Blower Size : 2” to 5”
CFM : 160 to 340
HG (Lift) : 12” to 18”
Recovery Tank : 15 to 55 gal
Tank finish : powdercoat
Hose : 25’ to 400’
Vacu-Boom System
An innovative and practical waste water capture system to prevent run-off from washing operations indoors and outdoors. Can also be used as a highly effective spill containment system for many hazardous materials. The best way to move water from point A to point B when filtration is not needed. Other systems available if filtration is a requirement.
The Vacu-Boom system is engineered to be used in a wide variety of industrial and commercial applications where chemicals and fluid waste must be contained and/or captured and removed from the site.
The Vacu-Boom is a hollow, flexible tube five inches in diameter that is placed directly on a hard surface to form a downslope side dam or to completely encircle the wash or containment area. The berm has a C shaped cross section with the open side down. There are small liquid inlet openings on the water side of the boom at the bottom edge. During use, the berm is connected by a 25 ft. vacuum hose to the portable wet vacuum recovery unit.
Click to see it on a trailer
Where can it be used?
- Outdoor vehicle or equipment washing
- In-plant equipment washing
- Emergency storm water containment
- Boats and ships – to prevent deck run-off
- Marinas – to prevent contamination from run-off
- Parking lot or sidewalk washing – to capture dirty water run-off
- Emergency hazardous liquid spill containment
- Airports – to capture run-off from aircraft washing
Features
- Can be used on any hard surface such as concrete, asphalt, wood and steel.
- Fast set up and take down – less than 5 minutes for one person.
- Simultaneously captures and extracts liquids for waste water and many liquid spills.
- Captures and contains concentrated flammables or hazardous liquids without extraction.
- Materials used in Vacu-Boom do not absorb liquids and contaminants. Can be rinsed off easily after use.
- Easy to store and transport. Vacu-Boom breaks down into 5 ft. long sections.
- High degree of tolerance for acids, caustics and petro chemicals.
We are also a dealer of Aaladin, Alkota, Hydrotek, MCS, Epps, and Jenny