• Extra High Volume Pump (12gpm@22psi)
• Triple Filtration System
• 20 Gallon Base
• 36”x26” Sink
• Portable (5 Heavy Duty Casters)
• High Volume Heavy Duty Pump (centrifugal)
• 1100 Watt Heater
• Low Water Shut-Off
• Low Water Alarm
• Adjustable Thermostat (150 degrees max.)
• Scrub Pad Holder
• Sink Support
• Main Fountain
• Flow Thru Scrub Brush
• Flow Thru Detail Brush
• Parts Magnet
• Power Nozzle
• Brush Kit
• Sink Insert Sediment Tray w/Foam
• Oil Absorbent Towel Holder
• Heavy Duty Wall Construction
• Total Outside Dimensions – L(31.0”) x W(40.5”) x H(40.5”)

Renegade TMB 3000 Parts Washers

• Same specs as 4000 except pump is 6gpm@12psi

• On casters for the ultimate portability. Don’t take the parts to the parts washer, take the parts washer to the parts.
• 110v Model(also available in 220volt)
• Heavy Duty 1/2” Polyethylene Base
• Automatic Low Level Shut Down
• Oil Skimmer with programmable 7-day Timer
• 7-Day System Timer
• 0-30 Minute Wash Cycle Timer
• Safety Door Switch
• Parts Tree
• Max Temperature 175 degrees max.
• Pump 60gpm @ 26psi
• Motor Driven Spray Manifold
• Load Large Parts With Ease
• Maximum Loading Capacity 500lbs
• Total Workspace Area – L(30”) x W(22”) x H(21”)
• Total Outside Dimensions – L(36.0”) x W(52.0”) x H(52.25”)

• 40 gallon water capacity
• 2hp flush seal pump
• Available for all power sources
• 7 kw heater (230v 1ph)
• 12 gauge steel
• S.S. air shield (door cover)
• Seal-less ez-load door
• Quick service fine screen filter
• Large removable basket
• 1000 lb. load capacity
• 31” load height
• 24” turn table
• 56 – spray jets
• 40” L x 44” W x 75” H
• 650 lb. shipping weight
• ETL & C-ETL LISTED

• 55 gallon water capacity
• 3hp seal-less pump
• Available for all power sources
• 7 kw heater (230v 1ph)
• 10 gauge steel
• S.S. air shield (door cover)
• Seal-less ez-load door
• Quick service fine screen filter
• Large removable basket
• 1000 lb. Load capacity
• 31” load height
• 24” diameter turntable
• 56 – spray jets
• 40” L x 55” W x 75” H
• 950 lb. Shipping weight
• ETL & C-ETL LISTED

• Dual zone quick service filters with slide out fine debris screen and small debris catch basket
• 85 gallon water capacity
• 3hp seal-less pump
• Available for all power sources
• 10 kw heater (230v 1ph)
• 10 gauge steel
• S.S. air shield (door cover)
• Seal-less ez-load door
• Steel oil skimmer
• Dry-floor (waste water) evaporator
• Power vent
• Small parts soaking system
• Large removable basket
• 1,500 lbs. load capacity
• 41” load height
• 28” turn table
• 72 – spray jets
• 45” L x 61” W x 87” H
• 1,200 lbs. shipping weight
• ETL & C-ETL LISTED

• 15 Minute Spring Wound Timer Operated Stainless Disc Type Oil Skimmer
• 4.5Kw Electric Heater
• Tank Debris Screen(170 Square Inches)
• 1HP Self Priming Centrifugal Pump with Down Spout Suction Screen
• 60 Minute Spring Wound Wash Timer
• Thermostat Switch with 175 Degrees F Setting
• 18 Spray Jets
• 50 Gallon Cleaning Solution Tank
• 500 LB. Load Capacity
• 1/15 HP Gear Driven 30” Diameter Turntable Basket with Parts Ring and Standard Bearing Design
• 208-240/60/1 Electrical Requirements
• 14 Gauge Tank and Cabinet Steel Plate Material
• Hinged Door with Handle, Latch, Safety Switch and Mechanical Seal( No Rubber Gaskets to Wear Out)
• 2 1/2” Diameter Casters
• 43” Inside and 66” Overall Height
• 44”W X 43”D Floor Space Required with Door Closed
• Removable Parts Tree and Basket
• Precaution Blue Paint

• Toggle Switch Operated Stainless Disc Type Oil Skimmer
• 13.5Kw Electrical Heater
• Tank Debris Screen( 132 Square Inch)
• 3hp Cast Iron Vertical Sealless Pump with Screen(50gpm @ 55psig)
• 60 min. Spring Wound Wash Timer
• Thermostat Switch with 175 Degrees F Setting *15 Spray Jet Nozzles
• 94 Gallon Cleaning Solution Tank
• Low Water Shut-off Switch
• 500lb. Load Capacity
• 35” Inside Height
• 1/20hp Gear Driven 27” Diameter Turntable Basket with Removable Parts Ring
• 240/480/60/3 OR 1 Electrical Requirements
• Hinged Door with Handle, Latch, Safety Switch and Mechanical Seal(No Rubber Gaskets to Wear Out)
• 2 1/2” Dia. Casters
• 10 Gauge Tank/12 Gauge Door and Cabinet Steel Plate Material
• 6” Dia. Cabinet Vent
• 48” Overall Height
• 36”W X 70”D Floor Space Required with Door Closed
• Durable Blue Powder Coat Finish